發電機啟動開關壞了怎么啟動

　　How to start the generator when the starting switch is broken如果發電機啟動開關壞了，則應該采用外部電源，將此外部電源直接連接到發電機的起動電路，然后將此外部電源的電壓控制在發電機的正常起動電壓范圍內，即可完成發電機的啟動。

　　If the starting switch of the generator is broken, an external power source should be used. This external power source should be directly connected to the starting circuit of the generator, and then the voltage of this external power source should be controlled within the normal starting voltage range of the generator to complete the starting of the generator.

　　開關壞了后，可以考慮用跳閘啟動電機。首先，將跳閘螺合到電機的起動端，然后將接線端接入相應的電源接口。在打開跳閘啟動按鈕時，電機就會啟動運轉。

　　After the switch is broken, you can consider starting the motor with a trip. Firstly, connect the tripping screw to the starting end of the motor, and then connect the wiring terminal to the corresponding power interface. When the trip start button is turned on, the motor will start running.

　　本文由工業尾氣發電機組提供技術支持，更多的詳細精彩內容請點擊我們的網站http://www.kmy0823.com，我們將會全心全意為您提供滿意的服務。

　　This article is supported by industrial exhaust gas generators. For more detailed and exciting content, please click on our website http://www.kmy0823.com We will wholeheartedly provide you with satisfactory service.